Present-Day Sea Level Change: Observations and Causes

We investigate climate-related processes causing variations of the global mean sea level on interannual to decadal time scale. We focus on thermal expansion of the oceans and continental water mass balance. We show that during the 1990s where global mean sea level change has been measured by Topex/Poseidon satellite altimetry, thermal expansion is the dominant contribution to the observed 2.5 mm/yr sea level rise. For the past decades, exchange of water between continental reservoirs and oceans had a small, but not totally negligible contribution (about 0.2 mm/yr) to sea level rise. For the last four decades, thermal contribution is estimated to about 0.5 mm/yr, with a possible accelerated rate of thermosteric rise during the 1990s. Topex/Poseidon shows an increase in mean sea level of 2.5 mm/yr over the last decade, a value about two times larger than reported by historical tide gauges. This would suggest that there has been significant acceleration of sea level rise in the recent past, possibly related to ocean warming. This revised version was published online in August 2006 with corrections to the Cover Date.     

利用改正数信息的北斗三号实时精密单点定位及性能分析

北斗三号全球卫星导航系统已正式建成并开通服务。为了利用实时改正数信息系统地揭示北斗三号精密单点定位性能，并为用户提供理论依据和应用参考，首先解算了卫星实时精密轨道、钟差及其改正数，分析了其精度。然后基于实时改正数信息，利用监测站广播星历和观测数据，分别进行了双频静态、双频仿动态、单频静态和单频仿动态仿实时精密单点定位，以评估其性能。结果表明：北斗三号MEO卫星实时轨道和钟差精度均值分别约为12cm和0.2ns，满足实时精密单点定位需求。静态实时精密单点定位精度优于动态，双频优于单频，均可达到分米级。对于定位收敛时间，双频静态最短，约为40min；双频动态和单频静态均约为85min；单频动态最长，约为120min。     

激波过弯道绕双圆柱流场

采用单曝光光栅干涉或双曝光光栅干涉，研究激波过弯道绕双圆柱传播的微波流场。采用单曝光法，成功显示入射激波到第一圆柱上的反射、绕射，到达第二圆柱上的反射、绕射。在同一底片上采用双次曝光，第一次脉冲记录直道上的平面波，第二次脉冲记录激渡过弯道绕双圆柱流场。这些照片对于研究反射、绕射及它们边界的相互作用是很有用的。     

考虑粘性时激波反射及壁面热流计算

本文采用显式 TVD 格式,求解薄层 Navier-Stokes 方程,计算了激波与楔面相互干扰的流场情况,得出了马赫反射的各种等强度线及固壁面上详细的物理量分布,根据计算得出的流场,计算了壁面摩擦阻力及热流分布。     

Early development of fern gametophytes in microgravity.

Dormant spores of the fern Ceratopteris richardii were flown on Shuttle mission STS-93 to evaluate the effects of micro-g on their development and on their pattern of gene expression. Prior to flight the spores were sterilized and sown into one of two environments: (1) Microscope slides in a video-microscopy module; and (2) Petri dishes. All spores were then stored in darkness until use. Spore germination was initiated on orbit after exposure to light. For the spores on microscope slides, cell level changes were recorded through the clear spore coat of the spores by video microscopy. After their exposure to light, spores in petri dishes were frozen in orbit at four different time points during which on earth gravity fixes the polarity of their development. Spores were then stored frozen in Biological Research in Canister units until recovery on earth. The RNAs from these cells and from 1-g control cells were extracted and analyzed on earth after flight to assay changes in gene expression. Video microscopy results revealed that the germinated spores developed normally in microgravity, although the polarity of their development, which is guided by gravity on earth, was random in space. Differential Display-PCR analyses of RNA extracted from space-flown cells showed that there was about a 5% change in the pattern of gene expression between cells developing in micro-g compared to those developing on earth.     

总线通讯实验系统中矢量字的处理方法

研究了在1553B总线通讯实验系统远程终端（RT）仿真中矢量字的处理方法。设计了矢量字的手动单个设置、自动更新和使能RT中断更新三种处理方法。详细分析了各种方法中数据传输的执行过程。由于实验系统中能够灵活地设置矢量字,因此可以实现对采用更新机制传输消息的通讯过程的仿真。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

垂直/短矩起降飞机机翼内埋式风扇布局气动特性分析

以垂直/短距起降飞机过渡飞行状态为背景,针对机翼内埋式风扇布局的自由来流/风扇喷流混合型流动,基于结构/非结构混合网格使用CFD方法进行了非定常数值模拟和分析.首先使用滑移网格技术对NASA涵道螺旋桨进行算例验证,其时均计算结果与实验值的误差为5.3%,证明了计算方法的可靠性和准确性,然后数值模拟了机翼内埋式风扇布局在不同迎角下的气动性能.结果表明:风扇喷流在机翼上产生了特有的“抽吸”和“堵塞”效应,引起了机翼总升阻力的显著增加,升力最大增量达到干净机翼升力的2.6倍,阻力最大增量为干净机翼阻力的3.2倍,混合流场在机翼后缘引起了升力损失并卷起对涡.      

基于拟动力学的航空发动机主轴球轴承热弹流润滑分析

以航空发动机主轴球轴承高速高温重载典型工况为算例,基于轴承拟动力学分析,得到滚动体与套圈之间的微接触区运动和受力状态,分别用Hamrock-Dowson(H-D)拟合公式和翟文杰热修正公式计算了最小膜厚(MFT),同时结合热弹流润滑分析得到最小膜厚分布,对比了试验测试、H-D拟合、翟文杰热修正和热弹流润滑分析4种算法的最小膜厚,并根据膜厚比判定了轴承的弹流润滑状态.结果表明:H-D拟合和翟文杰热修正最小膜厚与试验测试结果相差较远,热弹流润滑分析结果与试验数据吻合性较好,误差10%以内;探讨了不同工况下的轴承弹流润滑性能.结果表明:存在径向载荷时,润滑膜整体压力增大,膜厚减小;随着转速增大,压力减小,膜厚增大,但是增大的趋势减缓.      

负游隙对高速高温薄壁圆柱滚子轴承动态性能的影响分析

计算了圆柱滚子轴承径向游隙为负值时的等效径向预紧载荷,并考虑等效径向预紧载荷下的套圈弹性变形,通过求解包含套圈弹性变形接触变形等效径向预紧载荷的非线性方程组,得到负游隙圆柱滚子轴承内部的载荷分布情况,以及负径向游隙带来的套圈周向应力.以此分析了负游隙对轴承承载性能及疲劳寿命的影响.结果表明:负径向游隙能够有效降低轴承打滑率,但同时也会降低轴承疲劳寿命,因此在负游隙设计时需同时考虑打滑率和轴承寿命,选择恰当的负游隙.